HP Hight Pressure srl

Descripción y Características HP Hight Pressure srl

Since 1995 HP HIGH PRESSURE SRL produces, on a 2500 square meter productive area based in south of Milan a wide range of manual semi-automatic and fully automatic reverse osmosis watermakers, from 35 up to 3000lt/h in the standard series available with DC 12/24V tension supply or AC in all the standard voltages, for any kind of use, the battery system for sailboats and the professional system for Yachts and Mega-Yacht.

HP HIGH PRESSURE SRL is ISO 9001 certificated (EQA – UKAS) and designs by AUTODESK INVENTOR on the 3D format all watermakers produced in its facility, taking care of all the details and manufacturing the 80% of the machines components in the Zibido San Giacomo factory. To face all the more exigent quality standards, each of the watermakers produced is tested accurately before the shipment.

In its 13 years activity HP HIGH PRESSURE SRL, have excelled in the watermaker reverses osmosis market, introducing new and very important effective automation-system and advance technical solutions, that render the machines fully automatic.

All the plants of the HP’s production can be equipped with the membranes automatic washing system (HP VAL – HP patent 1997), that is a hydraulic valve that automatically exchanges the water inlet from the sea water side to the fresh water one in order to change from the desalination system to the membrane washing system and vice versa ;

The automatic pressure regulation system (HP RP TRONIC – HP patent 2002), a motorized needle valve, that avoids to operate the regulator by hands at every watermaker start, but that automatically regulates the system working pressure at a precise set value, with any kind of salinity and temperature of the sea water.

The membrane automatic conservation system (HP AMCS), doses a quantity of biocide liquid in the osmosis membranes during their flushing at every machine stop, avoiding the bacteria proliferation at the end of every desalination cycle. The AMCS can also be used for the winter conservation of the osmotic modules just increasing the dosing percentage of the quantity of biocide on the dosing pump.

The thermal energy recovery system of the electrics motors (HP TERS – Patent HP 2002), cooling the electric motors with the sea water feeding the system, pre-heats the seawater incoming on the membrane, rendering the membranes more productive at the same salinity and pressure level.

In the last years the on board electronics made wide steps on. All the automatic-series systems can be easily used even in the manual system, even in case one of the machine components failed. HP watermakers are equipped with the best electronics available on the market.

Therefore from January 2007 all the RP TRONIC HP plants will be able to communicate with all the monitoring systems on board by adopting a MODBUS protocol, programmed in the HP LOGIC. So finally the watermakers will be integrated to the computerized management systems of the boats.

Since 2008 are available the new watermakers with the custom membranes of 3.15 inch X 40 which have revolutioned the watermakers production rendering more efficient the 140 and 260 lt/h standard series, best sellers of HP brand.

HP DEMI 5, newest portable softening system, which allows to clean the boats with no spots on windows and hulls, and HP IN LINE FILTERS will be available from 2009.

All the HP plants are covered by a 3 years warranty on the functioning and on the corrosion for each single item assembled in the machine. The warranty is valid at our retailers and technical assistance network around the world.

Marcas que representa

HP WATERMAKERS - HP DEMI5

Contactar con HP Hight Pressure srl

1. Nombre
2. Teléfono
3. Email
4. Mensaje

HP Hight Pressure srl

Zibido San Giacomo (Lombardía)

Italia

• Telf.: Ver teléfono