Observations: The AMEL 60 was presented at the Cannes Yachting Festival in September 2019. It stands out as the winner of the best luxury yacht award of 2019. This unit hull No. 15 was delivered in June 2022. AVAILABLE FOR IMMEDIATE DELIVERY. Price negotiable. Equipment and documentation: CONSTRUCTION • Vacuum resin infusion molding. • Monolithic fiberglass (hull bottom) and PVC foam sandwich (deck and superstructure) • Anti-osmosis barrier with glass scales and vinylester resin, combined with isophthalic polyester resin. • Structure of frames in polyethylene omega-foam and plywood, laminated to the hull, as well as all the carpentry structure (bulkheads, furniture, hatches, etc.). This system guarantees the greatest rigidity of the entire unit and optimizes the dispersion of forces. The compression forces of the mast/running rigging are compensated with a support pillar for the mast and connecting rods bolted to the chainplates for the rigging. • The deck and bulkheads are glued and laminated together and to the hull (4 watertight bulkheads with isolation valves). • Deck walkways, cockpit, foredeck, and aft deck: the teak deck finish is molded into the deck. (exclusive AMEL process). • Cockpit with automatic bilge (2 scuppers). • Cast iron ballast fixed to the hull/keel by stainless steel bolts, sealed by epoxy treatment. • 2 monolithic laminated rudders filled with foam, with reinforced laminated edges. Rudder shafts reinforced with stainless steel. DECK FITTINGS • Stainless steel bow arch with integrated anchor guide. • Electric windlass controlled from the cockpit. Lewmar Delta anchor of 45kg in galvanized steel, 100m of galvanized chain 10mm. (option of 2 windlasses). • Bow, stern, and guardrails in stainless steel tube (access on port and starboard to facilitate lateral boarding). • Stainless steel guardrails. Teak seating on bow and stern balconies. • LED navigation lights. • 8 stainless steel cleats. • Side liferaft support. • Stainless steel chainplates. • Tidy travellers on the sheet car track. • All maneuvering (manual and electric) of sheets, main, and furling systems redirected to the cockpit. • 2 electric Genoa sheet winches (Harken anodized black). • 2 manual Genoa sheet winches (Harken anodized black). • 1 electric main sheet winch (Harken anodized black). • 2 manual winches on the mast, 2 halyards on the mast. • 2 halyard stoppers. • 12 hatches with opening and 3 portholes with opening. • On deck, 5 large hatches: Foredeck: large sail hatch (watertight compartment), with easy access to a watertight anchor well, and a spacious area for stowing fenders, moorings, and spare sails. Lighting with timer. Light-colored gel-coat finish. Aft deck: a large hatch for storing a dinghy, diving equipment, fenders, etc. 230V socket. Light with timer. Light-colored gel-coat finish. 230V ground socket with thermal. 220V cable. Galvanic isolator. Gas compartment. Access to the rudder and autopilot. Hatch closure for gas bottles. Locking system from inside the boat. Bilge pump with alarm. On port side, in the hallway: hatch with diesel fuel connections. 2 side hatches on the aft deck. • Spacious sunbathing area on the aft deck. • The transom opens and converts into a bathing platform, hydraulic opening system with remote control. Folding bathing ladder in a special fitting on the platform. Shower with single lever. Stowage in the step spaces. • Emergency ladder at the stern. COCKPIT CONTROL STATION • Wide, deep, comfortable, and safe cockpit with access step. • Strong composite hardtop, designed for sailing with maximum safety and protection in all weather conditions. • Front and side windshields made of glass. The central part opens just like the 2 hatches in the roof. • The set provides exceptional panoramic vision and very good ventilation. • Rigid overhead hatch. • Control station on the port side with wheel. • Electronics console in front of the wheel, with all electrical controls (engine, windlass, furlers, etc.). • Helm seat upholstered in chair and backrest. • Adjustable teak table. • Stowage hatch. • LED lighting in the control station with variable intensity. RIGGING • Carbon mast with in-mast electric furling system. AMEL carbon boom with electric topping lift system. Finish: 2-component polyurethane paint. • 3 sets of spreaders. • Adjustable rigid backstay on the boom. • LED deck light: 3 on the mast and at the end of the boom. • LED anchoring and top lights. • Dyform stainless steel standing rigging. • Vectran and Dyneema halyards. • Electric Profurl furlers. • External halyard on the mast for gennaker or spinnaker. • Auxiliary halyard for raising to the mast. • Boom extension for maneuvering heavy material (outboard motor, etc.). • ENGINE • Spacious and watertight engine room with all the boat's machinery. • High-density foam with excellent soundproofing properties. • Several lighting points, 220V socket. • Access: Hatch opening from the cockpit floor with the help of a gas piston. • Bilge pump. • Volvo engine, 4-cylinder, low revolutions of 180HP/132kw hydraulic reduction. Electronic controls. • Shaft transmission in line with the strut. • Fixed 3-blade propeller. Folding propeller as an option. • Fuel capacity: 900 l. • 24V fans/extractors for engine and batteries. • Bow thruster, 16 HP. WATER / SANITARY INSTALLATION • Freshwater capacity: (700 liters) tank under the salon floor with access hatches. • 50-liter water heater in the salon. • Freshwater pump in the engine room. • Gray water tank with compartments capacity 60 liters with 2 bilge pumps. (One electric pump and one manual.) • 2 black water tanks (80 liters each tank). • 3 black water tanks (80l each tank). ELECTRICAL INSTALLATION • 17.5 kW generator. • 24 V and 220 V panels with ammeter and voltmeter. • 12 V circuit for engine with 12 V / 150 A alternator and 2 starting batteries (55Ah). • 24 V service circuit – alternator (Volvo engine) 110 A and 720 Ah battery (Lithium). • 220 V circuit with shore connection at the stern with 230 V/24 V charger, 2 x 100 A chargers: 2 x 3500 W inverters. • Interior lighting 24V (mostly LED). • 220V and USB sockets. • 230V circuit dedicated to TV / Music equipment (800 W inverter). ALARMS • Alarm at the main bottom inlet valve. • Overfill alarm in the aft hatch. • Gray water level alarm. • Smoke detector in the salon. • Battery temperature alarm. • Battery charge level alarm. NAVIGATION ELECTRONICS • Furuno GP330 GPS • B&G Hydra 5000 central navigation unit: 1 GFD at the navigation station, 1 GFD in the cockpit, and 1 analog monitor in the cockpit. • Garmin 200I VHF at the navigation station. • Furuno Navpilot hydraulic autopilot 711C. SAILS AND ACCESSORIES • Tri-radial Hydranet mainsail with UVA protection. • Tri-radial Hydranet Genoa with UVA protection. • 2 x 15m moorings. • 2 x 25m moorings. • 8 fenders. Manuals, plans, diagrams, and user manual for equipment. INTERIORS Carpentry • Wood finishes: Light oak or American walnut, finished with matte varnish. 2-component multi-layer polyurethane varnish. (Other woods and glossy finishes available as an option). • Laminated floor (light oak). • Multiple handrails, lighting by spotlights and wall lamps (mostly LED). Stowage • Numerous stowage spaces including furniture, drawers, hatches, cabinets, and hatches under the floor. Finishes and upholstery • High-quality standard upholstery. A wide selection of upholstery available as an option. • Blinds on all portholes. • Blinds and mosquito nets on deck hatches. • Heeling covers in all cabins. SALON/CHART TABLE/ KITCHEN Salon: • Spacious and with plenty of natural light. It has good exterior visibility. 4 opening hatches, 6 fixed hatches, 4 fixed portholes on deck, • 2 opening portholes on deck, 4 large portholes on the sides. • LED spotlight lighting. • Numerous electrical sockets. • Adjustable table for 8 people, 1 very comfortable L-shaped sofa and another sofa next to the central bar unit. Stowage furniture for serving dishes, etc. • Lounge area: L-shaped sofa with wine/liquor cabinet, glassware cabinet. • TV screen (mirror screen) on the bulkhead near the chart table. • Music system: Fusion Apollo 2 Zones (salon and cockpit). On port side, navigation center chart table. • Chart table facing forward with stowage space and panel for electronics. • Easy access to 220V and 24V sources; 24 V and 12V sockets, 220V sockets, 220V and 24V panels with light. • Comfortable rotating and adjustable navigator's chair. • Excellent external visibility through a large porthole. Kitchen: • Located on starboard. • Functional, with plenty of light and ventilation: 2 large fixed portholes and 1 opening porthole. • Wide work surface in molded Corian with frame. • Sink with single lever faucet. • Combination of lower cabinets, drawers, and upper cabinets. • Marine induction stove with pot holder. • 125l refrigerator/freezer with 2 drawers. • Miele electric oven. • Miele extractor. • Miele microwave oven. • 180-liter cold column (2 refrigerator drawers). • 80-liter freezer with top access. • Miele dishwasher (12 sets). • Combined washer-dryer of 7 and 4 kg. • 230 V sockets. • Easy and quick access to the 230V panel and generator start. • 230V panel with backlighting. IN THE BOW: TWO CABINS WITH LARGE BED (SYMMETRICAL ONE TO PORT AND ANOTHER TO STARBOARD) • Access from the salon. • Watertight door. • Lighting and ventilation through portholes in the hull and 1 hatch with opening to deck. • Ceiling lights and reading lights (mostly LED). • Large double bed in each cabin with drawers and a large stowage space underneath. The bed lifts with the help of gas pistons. Heeling covers. • Multiple stowage cabinets. • 230V and USB sockets. BATHROOM IN EACH CABIN • Access from the salon or owner's cabin. • Watertight doors. • Lighting through hatch with opening (one in each bathroom). • LED ceiling light. • Stowage furniture with deep sink and single lever faucet. • Furniture, mirror, towel rail, paper holder, clothes hooks. • Electric vacuum marine W/C (freshwater) black water tank. • Separate shower with folding glass PMMA door, removable teak floor, single lever faucet, stowage furniture. • 230V socket. LARGE CABIN AT THE STERN (OWNER'S CABIN) • Access through watertight door. • Large central bed with nightstands on each side. Under the bed, a large stowage space with opening assisted by gas pistons, Heeling covers. • Porthole in the hull to inspect the propeller. • Multiple stowage furniture, double wardrobe + drawer + 2 single wardrobes. • On port side: desk, large chair, and mirror. • 2 portholes in the hull with blinds. • 1 large porthole at the stern on the deck, with blind. 2 portholes with opening. • 1 porthole with opening with blind in the bulkhead. • 3 hatches with opening with blind and mosquito net. • Light and power: Lamps and reading lights at the head of the bed. LED lights in the ceiling. 230V and USB sockets. • En-suite bathroom to port: Separate shower with folding glass PMMA door, removable teak floor, single lever faucet, stowage furniture. Stowage furniture with deep sink and single lever faucet. Furniture, mirror, towel rail, paper holder, clothes hooks. Large mirror on the door. LED lights in the ceiling. Electric vacuum marine W/C with freshwater black water tank. 220V socket. PRICE DOES NOT INCLUDE VAT

Notas: El AMEL 60 fue presentado en septiembre de 2019 en el Festival Náutico de Cannes. Destacado como ganador del premio a la mejor yate de lujo del año 2019.... Equipamiento y documentación:: CONSTRUCCIÓN • Moldes de infusión de resina al vacío. • Sandwich de fibra de vidrio monolítica (casco inferior) y espuma de PVC de celdas de espuma (cubierta y superestructura) • Barrera anti-osmosis con copos de vidrio y resina de viniléster, añadida a resina de poliéster isoftálico. • Estructura de marco de espuma de polietileno Omega y contrachapado, laminada al casco, así como toda la estructura de carpintería (tabiques, muebles, compartimentos, etc.). Este sistema garantiza la máxima rigidez de toda la unidad y optimiza la distribución de fuerzas...

Descripción: El AMEL 60 se presentó en el Festival Náutico de Cannes en septiembre de 2019. Se distingue como ganador del premio al mejor yate de lujo del año 2019.... Equipamiento y accesorios: CONSTRUCCIÓN • Moldeo por infusión de resina al vacío. • Sándwich monolítico de fibra de vidrio (fondo del casco) y espuma de PVC con celdas de espuma celular (puente y superestructura) • Barrera antiosmosis con escamas de vidrio y resina viniléster, aditivada con resina poliéster isoftálica. • Estructura del marco en polietileno expandido omega y contrachapado, laminado al casco, así como toda la estructura de carpintería (tabiques, muebles, cofres, etc.). Este sistema garantiza la máxima rigidez de toda la unidad y optimiza la dispersión de las fuerzas...

Detalles: El AMEL 60 fue presentado en el Festival Náutico de Cannes en septiembre de 2019. Se destaca como ganador del premio al mejor yate de lujo del año 2019.... Equipamiento:: CONSTRUCCIÓN • Moldeo por infusión de resina al vacío. • Fibra de vidrio monolítica (casco inferior) y sándwich de espuma de PVC de celdas de espuma celular (cubierta y superestructura) • Barrera anti-osmosis con copos de vidrio y resina viniléster, añadida a resina isoftálica de poliéster. • Estructura en polietileno espuma omega y contrachapado, laminada al casco, así como toda la estructura de carpintería (tabiques, muebles, taquillas, etc.). Este sistema garantiza la mayor rigidez de toda la unidad y optimiza la dispersión de las fuerzas...

Observaciones: El AMEL 60 se presentó en el Festival Náutico de Cannes en septiembre de 2019. Se distingue como ganador del premio al mejor yate de lujo del año 2019.... Equipamiento: CONSTRUCCIÓN • Moldeo por infusión de resina al vacío. • Sándwich de fibra de vidrio monolítica (casco inferior) y espuma de PVC de celdas en espuma celular (puente y superestructura) • Barrera anti-osmosis con escamas de vidrio y resina viniléster, añadidas a una resina poliéster isoftálica. • Estructura del armazón en polietileno espuma omega y contrachapado, laminada al casco, así como toda la estructura de carpintería (tabiques, mobiliario, cofres, etc.). Este sistema garantiza la mayor rigidez del conjunto y optimiza la dispersión de las fuerzas...

Observaciones: El AMEL 60 fue presentado en el festival de Yachting de Cannes en septiembre de 2019. Destaca como ganador del premio al mejor yate de lujo del año 2019 .... Equipamiento: CONSTRUCCIÓN • Moldeado de infusión de resina en vacío. • Fibra de vidrio Monolítica (casco inferior) y sándwich de espuma en PVC de celdas de espuma celular (cubierta y superestructura) • Barrera Anti-osmosis con escamas de vidrio y resina viniléster, sumado a resina de poliéster isoftálico. • Estructura de marcos en polietileno omega-espuma y madera contrachapada, laminada al casco, como toda la estructura de carpintería (mamparas, muebles, tambuchos, etc.). Este sistema garantiza la mayor rigidez de toda la unidad y optimiza la dispersión de las fuerzas...

Comentarios: El AMEL 60 se presentó en septiembre de 2019 en el Festival Náutico de Cannes. Destaca como ganador del premio al mejor yate de lujo del año 2019.... Equipamiento y documentación:: CONSTRUCCIÓN • Moldeo por infusión al vacío de resina. • Fibra de vidrio monolítica (parte inferior del casco) y sándwich de espuma de PVC de celdas celulares (cubierta y superestructura) • Barrera anti-osmosis con copos de vidrio y resina viniléster, añadida a la resina de poliéster isoftálico. • Estructura de marco en polietileno de espuma omega y contrachapado, laminada en el casco, así como toda la estructura de carpintería (tabiques, muebles, armarios, etc.). Este sistema garantiza la mayor rigidez de toda la unidad y optimiza la distribución de fuerzas...

Notas: AMEL 60 se presentó en el Festival Náutico de Cannes en septiembre de 2019. Destaca como ganadora del premio a la mejor yate de lujo del año 2019.... Equipamiento: CONSTRUCCIÓN • Moldeo por infusión de plástico al vacío. • Fibra de vidrio monolítica (casco inferior) y sándwich de espuma de PVC de celdas celulares (cubierta y superestructura) • Barrera anti-osmosis con virutas de vidrio y resina de viniléster, con adición de resina de poliéster isoftálico. • Estructura de marco en polietileno de espuma omega y contrachapado, laminada al casco, así como toda la construcción de carpintería (tabiques, muebles, armarios, etc.). Este sistema garantiza la mayor rigidez para toda la unidad y optimiza la distribución de fuerzas...

Comentarios: AMEL 60 fue presentado en el Festival Náutico de Cannes en septiembre de 2019. Se destaca como el ganador del premio a la mejor yate de lujo de 2019.... Equipamiento: CONSTRUCCIÓN • Moldeo por vacío de resina. • Fibra de vidrio monolítica (parte inferior del casco) y sándwich de espuma de PVC con celdas de espuma (cubierta y superestructura). • Barrera anti-osmótica con escamas de vidrio y resina viniléster, añadida a la resina de poliéster isoftálico. • Estructura de marco de poliéster omega espumado y contrachapado, laminada al casco, así como toda la carpintería (tabiques, muebles, compartimentos, etc.). Este sistema garantiza la mayor rigidez de todo el conjunto y optimiza la distribución de fuerzas...

Notas: El AMEL 60 fue presentado en el Festival de Yates de Cannes en septiembre de 2019. Se destaca como el ganador del premio al mejor yate de lujo de 2019.... Equipamiento: Construcción de molde de resina de vacío. Fibra de vidrio homogénea (casco inferior) y sándwich de espuma de PVC de celdas de espuma (superficie y estructura superior) barrera anti-osmosis con fibra de vidrio y resina viniléster añadida a resinas de poliéster isoftálico. Estructura del marco de polietileno espumado y contrachapado, laminado en la estructura, además de toda la carpintería (barreras, muebles, armarios, etc.). Este sistema garantiza la máxima rigidez de toda la unidad y mejora la distribución de fuerzas...

• Potencia del motor: 180.0
• Número de motores: 1
• Capacidad del tanque: 900

• ESP: 2300000

• Desplazamiento de agua: 32.0

180.0 hp